2010/03/06
 설계를 할 때 모든 부품을 직접 모델링을 하면 좋겠지만 여러가지 조건으로 인해 현실은 그렇지가 못합니다. 그래서 서로 공용 라이브러리를 구하려고 노력들을 많이 하고 계시죠. 특히나 기계설계 혹은 장비 설계를 하는 곳에서 풍부한 라이브러리는 필수 조건 중 한가지라고 할 수 있습니다. 그렇다면 이런 라이브러리는 무조건 수량이 많으면 좋을까요? 파일이 계속 많아지면 관리하는 측면에서 또 다른 문제가 발생을 할 수 있습니다. 따라서 패밀리테이블(Family Table)과 같이 한 모델이 여러개의 모델을 파생시키는 방식을 적극적으로 활용을 해야 하지요.

자 그럼 PTC의 Creo(크리오, Pro/ENGINEER)의 경우 어떠한 라이브러리를 제공하는지 설명을 드리겠습니다. 제가 PTC에 입사를 했던 10년전의 경우 메뉴얼이 CD로 제공이 되었지만 그 직전까지만 해도 실제 책자로 제공을 했었습니다. 물론 많은 CD도 제공을 했었지만 이제 세월이 흘러서 CD도 더 이상 제공을 하지 않고, 직접 다운로드 받아야 하는 세상이 되었습니다.

먼저 크리오를 실행하면 아래와 같은 창이 뜨고, Creo Elements/Pro 5.0의 경우 기본적으로 2개의 탭이 표시가 됩니다. 이중에서 우측에 있는 탭이 바로 라이브러리를 다운로드 할 수 있는 곳이지요.



위의 창에서 우측을 보면 Pro/LIBRARY, Manufactures, FIRST, Supplier Services 이렇게 4개의 메뉴가 있습니다. 가장 먼저 Pro/LIBRARY의 경우 PTC에서 제공을 하는 JIS, ANSI, DIN, MIL 등의 패스너(Fastener)류 즉, 볼트, 너트, 와샤, 핀 등을 제공하는 곳입니다. 물론 이곳에서 다운로드를 받지 않고, www.ptc.com 의 소프트웨어 다운로드 받는 곳에서 다운을 받을 수도 있습니다.



상세 목록을 아래와 같이 정리를 해 봤습니다. 너무 많아서 JIS 규격만 정리를 했는데 참조가 될지 모르겠군요. 암튼 참 많군요. ㅎㄷㄷ
      
    * JISBOLTS
          o JIS EYE BOLTS
                + EYEBOLTS
          o JIS FLAT HEAD BOLTS
                + FLAT HEAD BOLTS WITH REVERSE KEY, ROUGH FINISHED
                + SLOTTED FLAT HEAD BOLTS, FINE FINISHED
                + SLOTTED FLAT HEAD BOLTS, ROUGH FINISHED
          o JIS FOUNDATION BOLTS
                + FOUNDATION BOLTS, J-TYPE
                + FOUNDATION BOLTS, JA-TYPE
                + FOUNDATION BOLTS, L-TYPE
                + FOUNDATION BOLTS, LA-TYPE
          o JIS HEX BOLTS
                + ISO HEX BOLTS
                      # HEXAGON HEAD BOLTS, NOMINAL DIA BODY, GRADE A
                      # HEXAGON HEAD BOLTS, NOMINAL DIA BODY, GRADE B
                      # HEXAGON HEAD BOLTS, NOMINAL DIA BODY, GRADE C
                      # HEXAGON HEAD BOLTS, PITCH DIA BODY
                      # HEXAGON HEAD BOLTS, TOTALLY THREADED SHANK, GRADE A
                      # HEXAGON HEAD BOLTS, TOTALLY THREADED SHANK, GRADE B
                      # HEXAGON HEAD BOLTS, TOTALLY THREADED SHANK, GRADE C
                + NON ISO HEX BOLTS
                      # HEXAGON HEAD BOLTS, FINISHED
                      # HEXAGON HEAD BOLTS, REGULAR
                      # HEXAGON HEAD BOLTS, SEMI-FINISHED
                      # SMALL HEXAGON HEAD BOLTS, FINISHED
                      # SMALL HEXAGON HEAD BOLTS, SEMI-FINISHED
          o JIS HEX FLANGE BOLTS
                + HEXAGON BOLTS WITH FLANGE, TYPE 1
                + HEXAGON FLANGE BOLTS, CLASS 2
          o JIS SQUARE HEAD BOLTS
                + LARGE-SIZE SQUARE HEAD BOLTS, REGULAR
                + SQUARE HEAD BOLTS, FINISHED
                + SQUARE HEAD BOLTS, REGULAR
                + SQUARE HEAD BOLTS, SEMI-FINISHED
          o JIS SQUARE NECK BOLT
                + CUP HEAD SQUARE NECK BOLTS, GROOVED HEAD
                + CUP HEAD SQUARE NECK BOLTS, LARGE-SIZE HEAD
                + CUP HEAD SQUARE NECK BOLTS, SMALL-SIZE HEAD
          o JIS STUD BOLTS
                + STUD BOLTS
          o JIS WELD BOLTS
                + WELD BOLTS FOR PROJECTION WELD
          o JIS WING BOLTS
                + WING BOLTS, CLASS 1
                + WING BOLTS, CLASS 2
                + WING BOLTS, CLASS 3
    * JISNUTS
          o JIS DOME NUTS
                + DOMED CAP NUTS, TYPE 1
                + DOMED CAP NUTS, TYPE 2
                + DOMED CAP NUTS, TYPE 3
                + SMALL SIZE DOMED CAP NUTS, TYPE 1
                + SMALL SIZE DOMED CAP NUTS, TYPE 2
                + SMALL SIZE DOMED CAP NUTS, TYPE 3
          o JIS EYE NUTS
                + EYENUTS
          o JIS HEX FLANGE NUTS
                + HEXAGON NUTS WITH FLANGE
          o JIS HEX NUTS
                + ISO HEX NUTS
                      # HEXAGON NUTS, GRADE C
                      # HEXAGON NUTS, STYLE 1, GRADE A&B
                      # HEXAGON NUTS, STYLE 2, GRADE A&B
                      # HEXAGON THIN NUTS(CHAMFERED), GRADE A&B
                      # HEXAGON THIN NUTS, GRADE B(UNCHAMFERED)
                + NON ISO HEX NUTS
                      # HEXAGON NUTS, FINISHED, CLASS 1
                      # HEXAGON NUTS, FINISHED, CLASS 2
                      # HEXAGON NUTS, FINISHED, CLASS 3
                      # HEXAGON NUTS, FINISHED, CLASS 4
                      # HEXAGON NUTS, REGULAR, CLASS 1
                      # HEXAGON NUTS, REGULAR, CLASS 2
                      # HEXAGON NUTS, REGULAR, CLASS 3
                      # HEXAGON NUTS, SEMI-FINISHED, CLASS 1
                      # HEXAGON NUTS, SEMI-FINISHED, CLASS 2
                      # HEXAGON NUTS, SEMI-FINISHED, CLASS 3
                      # HEXAGON NUTS, SEMI-FINISHED, CLASS 4
                      # SMALL HEXAGON NUTS, FINISHED, CLASS 1
                      # SMALL HEXAGON NUTS, FINISHED, CLASS 2
                      # SMALL HEXAGON NUTS, FINISHED, CLASS 3
                      # SMALL HEXAGON NUTS, FINISHED, CLASS 4
                      # SMALL HEXAGON NUTS, SEMI-FINISHED, CLASS 1
                      # SMALL HEXAGON NUTS, SEMI-FINISHED, CLASS 2
                      # SMALL HEXAGON NUTS, SEMI-FINISHED, CLASS 3
                      # SMALL HEXAGON NUTS, SEMI-FINISHED, CLASS 4
          o JIS SLOTTED CASTLE NUT
                + HEXAGON CASTLE NUTS, CLASS 2, HIGH TYPE
                + HEXAGON CASTLE NUTS, CLASS 2, LOW TYPE
                + HEXAGON CASTLE NUTS, CLASS 4, HIGH TYPE
                + HEXAGON CASTLE NUTS, CLASS 4, LOW TYPE
                + HEXAGON SLOTTED NUTS, CLASS 1, HIGH TYPE
                + HEXAGON SLOTTED NUTS, CLASS 1, LOW TYPE
                + HEXAGON SLOTTED NUTS, CLASS 3, HIGH TYPE
                + HEXAGON SLOTTED NUTS, CLASS 3, LOW TYPE
                + SMALL HEXAGON CASTLE NUTS, CLASS 2, HIGH TYPE
                + SMALL HEXAGON CASTLE NUTS, CLASS 2, LOW TYPE
                + SMALL HEXAGON CASTLE NUTS, CLASS 4, HIGH TYPE
                + SMALL HEXAGON CASTLE NUTS, CLASS 4, LOW TYPE
                + SMALL HEXAGON SLOTTED NUTS, CLASS 1, HIGH TYPE
                + SMALL HEXAGON SLOTTED NUTS, CLASS 1, LOW TYPE
                + SMALL HEXAGON SLOTTED NUTS, CLASS 3, HIGH TYPE
                + SMALL HEXAGON SLOTTED NUTS, CLASS 3, LOW TYPE
          o JIS SQUARE NUTS
                + SQUARE NUTS
          o JIS WING NUTS
                + WING NUTS, CLASS 1
                + WING NUTS, CLASS 2
                + WING NUTS, CLASS 3
    * JISPINS
          o ISO PINS
                + ISO TAPER PINS
                + PARALLEL PINS, CLASS A
                + PARALLEL PINS, HARDENED(DOWEL PINS)
                + PARALLEL PINS WITH INTERNAL THREAD, CLASS 1
                + PARALLEL PINS WITH INTERNAL THREAD, CLASS 2B
                + SPLIT PINS
                + TAPER PINS WITH EXTERNAL THREAD
                + TAPER PINS WITH INTERNAL THREAD, CLASS A&B
          o NON ISO PINS
                + SPRING-TYPE STRAIGHT PINS, SLOTTED
                + TAPER PINS
                + TAPER PINS WITH SPLIT
    * JISRIVETS
          o JIS COLD HEADED RIVETS
                + COUNTERSUNK COLD HEAD RIVETS
                + FLAT COLD HEAD RIVETS
                + PAN COLD HEAD RIVETS
                + SMALL SIZE SNAP COLD HEAD RIVETS
                + SNAP COLD HEAD RIVETS
          o JIS HOT HEADED RIVETS
                + CHEESE HOT HEAD RIVETS
                + COUNTERSUNK HOT HEAD RIVETS
                + RAISED COUNTERSUNK HOT HEAD RIVET FOR BOILER
                + RAISED COUNTERSUNK HOT HEAD RIVET FOR SHIP
                + RAISED COUNTERSUNK HOT HEAD RIVETS
                + ROUND HOT HEAD RIVETS
                + ROUND HOT HEAD RIVETS FOR BOILER
          o JIS TUBULAR RIVETS
                + COUNTERSUNK TUBULAR HEAD RIVETS
                + FLAT TUBULAR HEAD RIVETS
                + ROUND TUBULAR HEAD RIVETS
                + THIN ROUND TUBULAR HEAD RIVETS
                + TRUSS TUBULAR HEAD RIVETS
    * JISSCREWS
          o JIS CROSS RECESSED M/C SCREWS WITH WASHER
                + CROSS RECESSED BINDING HEAD MACHINE SCREWS WITH WASHER
                + CROSS RECESSED COUNTERSUNK HEAD MACHINE SCREWS WITH WASHER
                + CROSS RECESSED OVAL COUNTERSUNK HEAD MACHINE SCREWS WITH WASHER
                + CROSS RECESSED PAN HEAD MACHINE SCREWS WITH WASHER
                + CROSS RECESSED TRUSS HEAD MACHINE SCREWS WITH WASHER
          o JIS CROSS RECESSED SCREWS
                + ISO CROSS RECESSED SCREWS
                      # CROSS RECESSED COUNTERSUNK FLAT HEAD SCREWS
                      # CROSS RECESSED PAN HEAD SCREWS
                      # CROSS RECESSED RAISED COUNTERSUNK HEAD SCREWS
                + NON ISO CROSS RECESSED SCREWS
                      # CROSS RECESSED BINDING HEAD MACHINE SCREWS
                      # CROSS RECESSED COUNTERSUNK HEAD MACHINE SCREWS
                      # CROSS RECESSED PAN HEAD MACHINE SCREWS
                      # CROSS RECESSED RAISED COUNTERSUNK HEAD MACHINE SCREWS
                      # CROSS RECESSED ROUND HEAD MACHINE SCREWS
                      # CROSS RECESSED TRUSS HEAD MACHINE SCREWS
          o JIS HEX SCREWS WITH WASHER
                + CROSS-RECESSED HEXAGON HEAD SCREWS WITH WASHER, UPSET TYPE
                + HEXAGON HEAD SCREWS WITH WASHER, TRIMMED TYPE
                + HEXAGON HEAD SCREWS WITH WASHER, UPSET TYPE
                + SMALL HEXAGON HEAD SCREWS WITH WASHER, TRIMMED TYPE
                + SMALL HEXAGON HEAD SCREWS WITH WASHER, UPSET TYPE
          o JIS HEX SOCKET HEAD SCREWS
                + HEXAGON SOCKET BUTTON HEAD SCREWS
                + HEXAGON SOCKET HEAD CAP SCREWS
                + HEXAGON SOCKET HEAD SHOULDER SCREWS
          o JIS SET SCREWS
                + JIS HEX SOCKET SET SCREWS
                      # HEXAGON SOCKET SET SCREWS WITH CONE POINT
                      # HEXAGON SOCKET SET SCREWS WITH CUP POINT
                      # HEXAGON SOCKET SET SCREWS WITH DOG POINT
                      # HEXAGON SOCKET SET SCREWS WITH FLAT POINT
                      # HEXAGON SOCKET SET SCREWS WITH OVAL POINT
                + JIS SLOTTED SET SCREWS
                      # SLOTTED SET SCREWS WITH CONE POINT
                      # SLOTTED SET SCREWS WITH CUP POINT
                      # SLOTTED SET SCREWS WITH FLAT POINT
                      # SLOTTED SET SCREWS WITH LONG DOG POINT
                      # SLOTTED SET SCREWS WITH ROUND POINT
                + JIS SQUARE SET SCREWS
                      # SQUARE HEAD SET SCREWS WITH CONE POINT
                      # SQUARE HEAD SET SCREWS WITH CUP POINT
                      # SQUARE HEAD SET SCREWS WITH FLAT POINT
                      # SQUARE HEAD SET SCREWS WITH LONG DOG POINT
                      # SQUARE HEAD SET SCREWS WITH ROUND POINT
          o JIS SLOTTED M/C SCREWS
                + ISO SLOTTED M/C SCREWS
                      # SLOTTED CHEESE HEAD MACHINE SCREWS
                      # SLOTTED COUNTERSUNK HEAD MACHINE SCREWS
                      # SLOTTED PAN HEAD MACHINE SCREWS
                      # SLOTTED RAISED COUNTERSUNK HEAD MACH. SCREWS
                + NON ISO SLOTTED M/C SCREWS
                      # BINDING HEAD MACHINE SCREWS
                      # COUNTERSUNK HEAD MACHINE SCREWS
                      # FLAT FILLISTER HEAD MACHINE SCREWS
                      # OVAL FILLISTER HEAD MACHINE SCREWS
                      # PAN HEAD MACHINE SCREWS
                      # RAISED COUNTERSUNK HEAD MACHINE SCREWS
                      # ROUND HEAD MACHINE SCREWS
                      # TRUSS HEAD MACHINE SCREWS
          o JIS TAPPING SCREWS
                + JIS CROSS RECESSED TAPPING SCREWS
                      # CROSS REC. COUNTERSUNK HEAD TAPPING SCREWS,TYPE C&F
                      # CROSS REC. RAISED COUNTERSUNK HD TAP. SCR.,TYPE C&F
                      # CROSS RECESSED BINDING HEAD TAPPING SCREWS, CLASS 1 - 4
                      # CROSS RECESSED BRAZIER HEAD TAPPING SCREWS, CLASS 1 - 4
                      # CROSS RECESSED COUNTERSUNK HEAD TAPPING SCREWS, CLASS 1 - 4
                      # CROSS RECESSED OVAL COUNTERSUNK HEAD TAPPING SCREWS, CLASS 1 - 4
                      # CROSS RECESSED PAN HEAD TAPPING SCREWS, CLASS 1 - 4
                      # CROSS RECESSED PAN HEAD TAPPING SCREWS,TYPE C&F
                      # CROSS RECESSED TRUSS HEAD TAPPING SCREWS, CLASS 1 - 4
                + JIS HEX TAPPING SCREWS
                      # CROSS RECESSED HEXAGON HEAD TAPPING SCREWS, CLASS 2-4
                      # FLANGED HEXAGON HEAD TAPPING SCREWS, CLASS 2-4
                      # HEXAGON HEAD TAPPING SCREWS, CLASS 2-4
                      # HEXAGON HEAD TAPPING SCREWS, TYPE C&F
                + JIS SELF DRILLING TAPPING SCREWS
                      # SELF DRILLING FLANGED HEXAGON HD TAPPING SCREWS, CONE&DRILL POINT
                      # SELF DRILLING FLAT HEAD TAPPING SCREWS, CONE&DRILL POINT
                      # SELF DRILLING OVAL COUNTERSUNK HD TAPPING SCREWS, CONE&DRILL POINT
                      # SELF DRILLING PAN HEAD TAPPING SCREWS, CONE&DRILL POINT
                      # SELF DRILLING SMALL-SIZE FLAT HD TAPPING SCREWS, CONE&DRILL POINT - JIS B 1125
                      # SELF DRILLING TRUMPET HEAD TAPPING SCREWS, CONE&DRILL POINT
                      # SELF DRILLING WAFER HEAD TAPPING SCREWS, CONE&DRILL POINT
                + JIS SLOTTED TAPPING SCREWS
                      # SLOTTED COUNTERSUNK HEAD TAPPING SCREWS, CLASS 1-4
                      # SLOTTED COUNTERSUNK HEAD TAPPING SCREWS,TYPE C&F
                      # SLOTTED PAN HEAD TAPPING SCREWS, TYPE C&F
                      # SLOTTED PANHEAD TAPPING SCREWS, CLASS 1-4
                      # SLOTTED RAISED COUNTERSUNK HEAD TAPPING SCREWS, CLASS 1-4
                      # SLOTTED RAISED COUNTERSUNK TAPPING SCREWS,TYPE C&F
    * JISWASHERS
          o CONICAL SPRING WASHERS, CLASS 1
          o CONICAL SPRING WASHERS, CLASS 2
          o PLAIN FINISHED CIRCULAR WASHERS
          o PLAIN LARGE SQUARE WASHERS
          o PLAIN REGULAR CIRCULAR WASHERS
          o PLAIN SMALL CIRCULAR WASHERS
          o PLAIN SMALL SQUARE WASHERS
          o SPRING LOCK WASHERS
     
자 그럼 두 번째 Manufactures를 한번 볼까요? 이 부분은 우리가 더욱 필요한 실제 각 부품 메이커의 모델 번호를 검색해서 그 부품을 직접 조립을 할 수 있는 부분입니다. 여러가지의 페이지가 제공이 됩니다. 여기서 원하는 메이커를 선택한 다음 사양 혹은 모델 번호를 입력을 하면 Pro/ENGINEER로 모델링이 된 모델을 무료로 다운로드 받을 수가 있습니다. 아~ 물론 그 중에서는 일반 STEP이나 IGES로 제공을 하는 곳도 있긴 하지요.




자 그럼 휴일인 오늘은 이 정도만 설명을 드리고 다음 기회에 좀 더 상세한 설명을 드리도록 하겠습니다.


사업자 정보 표시
주식회사 와파 | 허환호 | 경기도 수원시 영통구 대학로 48 212호 | 사업자 등록번호 : 791-87-00539 | TEL : 031-214-1120 | Mail : hhuh@proe.co.kr | 사이버몰의 이용약관 바로가기
Posted by 재영아빠 재영아빠™

댓글을 달아주세요

  1. 넙죽이
    2010.03.08 09:31 신고
    댓글 주소 수정/삭제 댓글
    개발 할때 몇번 받아서 써 보니 편하고 좋던데요 ^^
    많이 안찾아도 될것 같아요 ^^ 정리 해주셔서 ~
  2. 나이스
    2017.07.07 08:18 신고
    댓글 주소 수정/삭제 댓글
    KS 규격은 없는 건가요 ...아쉽네요 ㅠㅠ
  3. ㅇㅇ
    2018.11.06 16:29 신고
    댓글 주소 수정/삭제 댓글
    좋은 정보 감사합니다. 복받으세요 ㅎㅎ


카테고리

카테고리 (574)
◁ 공지사항 ▷ (1)
3D Printer (15)
Computer (25)
Creo (233)
MathCAD (14)
PDM/PLM (17)
News (180)
여행과 사진 (87)
Total : 2,744,073
Today : 85 Yesterday : 437
Statistics Graph